Epson Equity LT-386SX User Manual - Page 30
Connecting the AC Adapter
View all Epson Equity LT-386SX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Make sure the serial port is set up to function properly. If you are using the port for a serial printer, you must also redirect printer output from the parallel port to the serial port. Use the MS-DOS MODE command (or the Epson MENU program) to make these changes. See your MS-DOS Reference Manual for instructions. The standard DIP switch settings for the LT-386SX define your RS232C port as the primary serial port. If you think the DIP switch settings have been changed or you would like a different setting, see Appendix A. 4 Connecting the AC Adapter Follow these steps to connect the AC adapter: 1. Make sure the computer's power switch (located on the right side of the computer) is turned off. 2. Turn the computer around so the back panel is facing you. Position the back panel slightly over the edge of the desk or table. Setting Up Your System 1-11