Epson Equity LT-386SX User Manual - Page 200
Libpath=c:\osz\lcd, Copy A:bvscalls.dll C:\dll, Copy Config.sys+con, Config.sys, Enter
View all Epson Equity LT-386SX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
6. Type the following and press Enter: LIBPATH=C:\OSZ\LCD 7. Press F6 and then press Enter. 8. Reboot the computer. You can now use OS/2 with the LCD. If you want to place the LCD driver in your DLL directory and remove the LCD directory you created, use the steps below. 1. Insert the Reference diskette into drive A. Type the following and press Enter: COPY A:BVSCALLS.DLL C:\DLL\ 2. Type CD\ and press Enter to change to the root directory. 3. Type the following and press Enter: COPY CONFIG.SYS+CON: CONFIG.SYS 4. Type the following and press Enter: LIBPATH=C:\OSZ\DLL 5. Press F6 and then press Enter. 6. Reboot the computer. 7. Delete the files in the LCD directory, and then delete the LCD directory. The reason this procedure is required after OS/2 has been installed is that OS/2 protects files currently in use and does not allow you to delete or replace them. Using OS/2 E-3