Epson G6870 User Manual - Page 47
Attaching and Removing a Lens, Attaching the Lens Unit
View all Epson G6870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Attaching and Removing a Lens Follow the instructions in these sections to attach or remove a compatible lens. Attaching the Lens Unit Removing the Lens Unit Parent topic: Setting Up the Projector Attaching the Lens Unit You can attach a compatible lens to the projector. Caution: Place the projector so it faces to the side or down to attach a lens to help prevent dirt or dust from entering the projector and lowering the projection quality. Be sure to attach only a compatible lens. Avoid touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface. 1. Turn the focus ring as shown until it stops. Note: If you installed the projector facing up at an angle of 35 to 150° or down at an angle of -35 to -150°, tighten the lens torque ring, but not too tightly. Over-tightening the torque ring can cause it to malfunction. 47