Epson LQ-1010 User Manual - Page 176
FG wire attached, Using the Printer Options
View all Epson LQ-1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
The Interface Boards 3. Attach the plug end of the FG wire onto the FG pin located on top of the interface board. 4. Set the DIP switches on the interface board according to the manual accompanying it. FG wire attached 1. Carefully place the interface board next to the printer as shown below. Use the CG screw to connect the round end of the FG (frame ground) wire to the main board. 5-46 Using the Printer Options
The Interface Boards
3.
Attach the plug end of
of the interface board.
the FG wire onto the FG pin located on top
4. Set the DIP switches on the interface board according to the manual
accompanying it.
FG wire attached
1.
Carefully place the interface board next to the printer as shown
below. Use the CG screw to connect the round end of the FG
(frame ground) wire to the main board.
5-46
Using the Printer Options