Epson LQ-1010 User Manual - Page 203

Printing Problem Printed characters are not what you expected (continued). Graphic characters or fines are being printed instead of the selected italic characters. The wrong international characters are being printed. Solution The wrong character table is selected. If your application program is capable of sending control codes, specify the italic character table using ESC t 0. You can also select the italic character table by changing a DIP switch setting. To do this, turn off the power, set DIP switch 1-7 to off; then turn on the power. See Chapter 3. The wrong international character set is selected. If your application program is capable of sending control codes, specify the desired international character set using ESC R n. See the description of ESC R in Chapter 9. You can also select the international character table by changing DIP switch settings. To do this, turn off the power and set DIP switches 1-1, 1-2, and 1-3 to the correct positions for the character set you want. See Chapter 3. Troubleshooting 7-9