Epson LQ-1010 User Manual - Page 180
LQ-1010's, 1 MARK, BPS Bits Per Second.
View all Epson LQ-1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
The Interface Boards Baud rate selection You can select baud rates from 75 to 19,200 BPS (Bits Per Second). When setting the baud rate, make sure you use the bit rate selection table for printers with buffers (in the #8143 interface manual). For more information on the LQ-1010's input buffer settings, see the section on DIP switch functions in Chapter 3 of this manual. Handshaking timing When the vacant area for data in the input buffer drops to 256 bytes, the printer outputs an X-OFF code or sets the DTR flag to "1" (MARK) indicating that it cannot receive data. Error handling When a parity error is detected, your printer prints an asterisk (*). All other errors, including framing and overrun, are ignored. 5-50 Using the Printer Options
The Interface Boards
Baud rate selection
You can select baud rates from
75
to
19,200
BPS (Bits Per Second).
When setting the baud rate, make sure you use the bit rate selection
table for printers with buffers (in
the #8143
interface manual).
For more information on the
LQ-1010’s
input buffer settings, see the
section on DIP switch functions in Chapter 3 of this manual.
Handshaking timing
When the vacant area for data in the input buffer drops to
256
bytes,
the printer outputs an X-OFF code or sets the DTR flag to
“1” (MARK)
indicating that it cannot receive data.
Error handling
When a parity error is detected, your printer prints an asterisk (*). All
other errors, including framing and overrun, are ignored.
5-50
Using the Printer Options