Epson LQ-1010 User Manual - Page 65
MULTI-PART, position 2 on the scale.
View all Epson LQ-1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Printing on Special Paper To change the paper thickness setting, follow these steps. 1. Make sure that the printer is turned off. Then remove the printer cover. WARNING: If the printer has just been in use, the print head may be hot. Allow it to cool before touching it. 2. Select the paper thickness you want according to the table on the following page. For normal use, the lever should always be set to position 2 on the scale. To help you check the position of the paper thickness lever, the orange MULTI-PART light on the control panel comes on if the lever is set to position 4 or higher. Paper Handling 2-25
Printing on Special Paper
To change the paper thickness setting, follow these steps.
1.
Make sure that the printer is turned off. Then remove the printer
cover.
WARNING: If the printer has just been in use, the print head
may be hot. Allow it to cool before touching it.
2.
Select the paper thickness you want according to the table on the
following page. For normal use, the lever should always be set to
position 2 on the scale.
To help you check the position of the paper thickness lever, the
orange
MULTI-PART
light on the control panel comes on if the lever
is set to position 4 or higher.
Paper Handling
2-25