Epson LW-700 Quick Start and Warranty - Page 9
Inserting and removing tape cartridges, epson.com/labelworks
View all Epson LW-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Inserting and removing tape cartridges Use only tape cartridges with this mark: . You can use LabelWorks tapes with widths ranging from 1/4 inch (6 mm) to 1 inch (24 mm). See the list on the back cover, or go to epson.com/labelworks (U.S.) or epson.ca/labelworks (Canada). 1. Remove any slack from the tape using a pencil or pen. 2. Lift up the tape cover. 3. Insert the cartridge and press it down firmly until it snaps into place. 6 | Getting Started
6
|
Getting Started
Inserting and removing tape
cartridges
Use only tape cartridges with this mark:
.
You can use LabelWorks tapes with widths
ranging from 1/4 inch (6 mm) to 1 inch (24
mm).
See the list on the back cover, or go to
epson.com/labelworks
(U.S.) or
epson.ca/labelworks
(Canada).
1.
Remove any slack from the tape using a
pencil or pen.
2.
Lift up the tape cover.
3.
Insert the cartridge and press it down
firmly until it snaps into place.