Epson P5000 User's Guide - Page 11
Removing the Battery, time, you should remove the battery.
![]() |
UPC - 010343860483
View all Epson P5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
To charge the battery, connect the AC adapter as shown below. Connect the other end to the power cord, and plug it into an electrical outlet. Caution: Do not connect the AC adapter when the battery is not installed; this can damage the viewer. Turn off the viewer before disconnecting the AC adapter. The battery status is displayed in the top right corner of the LCD screen when the viewer is on. Battery is fully charged. Battery power is about half full. Battery power is low. Battery power is running out. Charge the battery using the AC adapter. Battery is charging. Note: The battery may become hot when the viewer is operated during charging. Charging will stop until the battery cools down. Removing the Battery If you plan to store the viewer for an extended period of time, you should remove the battery. 1 Make sure the viewer is turned off. Caution: Remove the AC adapter if it is connected to the viewer. Never remove the battery while the viewer is turned on. Doing so may cause files to be lost or damaged. 2 Open the battery cover. 3 Push the latch down. The battery pops out. Getting Started 11
![](/manual_guide/products/epson-p5000-users-guide-c642f97/11.png)