Epson PP-100II Users Guide - Page 31
Error Discs, Precautions for Duplicating Discs
View all Epson PP-100II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Error Discs Discs with write/read error will be ejected to different stackers depending on the output stacker. ❏ When stacker 2 is set as the output stacker: Ejected to stacker 3 (when stacker 3 is used) or stacker 4 (when stacker 3 is not used). ❏ When stacker 3 is set as the output stacker: Ejected to stacker 3. ❏ When stacker 4 is set as the output stacker: Ejected to stacker 4. Note: You can print an error mark on any disc with a write error to identify error discs. & See "Failure error mark" on page 28. Precautions for Duplicating Discs ❏ Please use a CD/DVD drive that supports MMC 4.0-compatible commands and operates in conformity with MMC 4.0 as a source drive for copying. (Please check the Epson website for a list of drives for which operation has been verified.) ❏ Please use a BD drive that supports MMC 5.0-compatible commands and operates in conformity with MMC 5.0 as a source drive for copying. (Please check the Epson website for a list of drives for which operation has been verified.) ❏ Copying CDs/DVDs/BDs may not be possible depending on the type of CD/DVD/BD source drive used. If problems occur, please try using a different CD/DVD/BD source drive for copying. ❏ If the source disc is a multi-session CD/DVD/BD, it cannot be copied. ❏ If the source disc is a packet-written CD, it cannot be copied. Publishing Discs 31