Epson Personal Document Station User Setup Information - PC - Page 7

Installing the Card Follow these steps to install the card in your computer: 1. Turn off the computer and any peripheral devices. 2. Disconnect the computer's power cable from the electrical outlet and from the back panel. Also disconnect any other cables, including the keyboard cable. 3. Remove the cover from your computer. If you need detailed instructions, see your computer manual. 4. Before you touch any of the computer's internal components, touch an unpainted metal surface inside the computer case to discharge any static electricity. 5. Choose an option slot for the interface card. You can install the card in any available slot. 6. Remove the retaining screw from the option slot cover and remove the slot cover. Keep the screw to secure the interface card to the computer. Store the slot cover in a safe place in case you remove the interface card later. 7. Insert the interface card into the slot, guiding it straight down. Push the card down firmly (but carefully); you should feel it fit into place. 8. Secure the card to the computer with the retaining screw. 9. Replace the computer's cover, reconnect all the cables, and plug the power cord into an electrical outlet. Getting Started 5