Epson PowerLite 77c User's Guide - Page 65
Viewing Lamp Usage and Other Information
View all Epson PowerLite 77c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
■ Language Select the language to be used for the projector menus. 4. When you're finished, press Esc or Menu. Viewing Lamp Usage and Other Information Use the Info menu to view information about the display settings of your computer and the number of hours the lamp has been used. 1. Press the Menu button and select the Info menu. You see a screen displaying the following information: ■ Lamp Hours Displays the number of hours the lamp has been used. The life span of the lamp ranges from about 3000 hours in High brightness mode to about 4000 hours in Low brightness mode. If the number shown is close to 3000 or the information is displayed in red, make sure you have a spare lamp handy. ■ Source Displays the input source currently being projected. ■ Input Signal (computer, RGB video, and component video) Displays the input signal setting. ■ Resolution (computer, RGB video, and component video) Displays the input resolution. ■ Video Signal (composite and S-Video) Displays the video signal format. ■ Refresh Rate (computer, RGB video, and component video) Displays the refresh rate. ■ Sync Info (computer, RGB video, and component video) Provides information that may be needed by the service technician. note You can make changes to many of the signal settings on the Signal menu. See page 58 for details. note The lamp usage timer doesn't register until you've used the lamp for at least 10 hours. Fine-tuning the Projector 65