Epson PowerLite 85 User's Guide - Page 122
The message, is displayed., Only part of the image is displayed.
View all Epson PowerLite 85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
6. Make sure the Mirror Displays checkbox is selected. The message Not Supported is displayed. ■ Make sure the correct Input Signal is selected in the Signal menu (see page 93). ■ Make sure your computer's resolution doesn't exceed UXGA (1600 × 1200) and the frequency or refresh rate is supported by the projector (see page 138). If necessary, change your computer's resolution setting. Only part of the image is displayed. ■ Press the Aspect button on the remote control to select a different setting (see page 34). ■ If projecting from a computer, press the Auto button on the remote control. Also make sure the image Position setting is correct in the Signal menu (see page 92). ■ Check the projector's Resolution setting (see page 92). Select Normal or Wide, depending on the size of your computer's display panel. ■ Make sure your computer is not set to display an extended desktop or dual display. ■ Press the Esc button on the remote control to cancel the E-Zoom function. ■ Make sure your computer's resolution setting is correct. Ideally, it should be 1280 × 800 to match the projector's native resolution for the PowerLite 826W, or 1024 × 768 for the PowerLite 825 or 85. If this option isn't available, select one of the other compatible video formats listed on page 138. ■ You also may need to modify existing presentation files if you created them for a different resolution. See your software documentation for specific information. 122 Solving Problems