Epson PowerLite 85 User's Guide - Page 54
Connecting to a Wired Network
View all Epson PowerLite 85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Guide for instructions on installing the EMP NS Connection software. The EasyMP Operation Guide also contains instructions on using the software to project over the network. Connecting to a Wired Network With a shielded, Category-5 Ethernet cable, you can connect the projector to your network and configure it with an IP address. You can then project from multiple computers on your network without changing any cables. 1. Connect the projector to your network using a commercially available 100BaseTX or 10BaseT network cable. Connect the cable to the LAN port on the projector as shown. Network cable 2. Connect the other end to your Ethernet hub or router. 3. Point the remote control at the projector and press the Ppower button. 4. Press the LAN button on the remote control to select network as the source. 54 Using the Projector on a Network