Epson PowerLite D6250 User's Guide - Page 130
Replacing the Air Filter, Air Filter and Vent Maintenance, Projector Light Status
View all Epson PowerLite D6250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Note: If dust is difficult to remove or the air filter is damaged, replace the air filter. 6. Place the air filter back in the projector as shown. 7. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Related references Projector Light Status Replacing the Air Filter You need to replace the air filter in the following situations: • After cleaning the air filter, you see a message telling you to clean or replace it • The air filter is torn or damaged Note: You must install an air filter or the projector will turn off after about one minute. You can replace the air filter while the projector is mounted to the ceiling, if necessary. The illustrations below show the projector placed on a table. 1. Turn off the projector and unplug the power cord. 130