Epson SF-110 User Manual - Page 22
GPS positioning, Skipping GPS positioning
View all Epson SF-110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Setting up your SF-110 GPS positioning When you switch to the Measurement screen, the product receives a signal from various satellites, and identifies your GPS position. c Important: Make sure you are outside with no obstructions overhead, and try to keep the product as still as possible. When GPS positioning is complete, an alarm sounds and the measurement screen is displayed. Note: O It usually takes less than two minutes to complete GPS positioning. If it takes more than two minutes and Failed is displayed, select Cancel, move to a different location, and try again. D Press D to display the Menu. C/D Press C or D to highlight Workout. O When GPS positioning is complete, the product receives a signal from the GPS satellite once every hour. When the measurement screen is displayed, you can start measuring. See "Measuring your workouts" on page 29. Skipping GPS positioning If you do not want to use GPS features, or if GPS positioning is taking too long, press C or D to highlight Skip, then press A. A Press A. GPS positioning starts. 22