Epson SF-110 User Manual - Page 75
Measurement settings, Display Lap Screen
View all Epson SF-110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Settings Measurement settings Setting Activity Type AT Lap Options Run* Walk ON OFF* AT Pause Target Pace ON OFF* ON* OFF HR1 Alarm GPS ON OFF* Tones* OFF - Screen Screen 1 Screen 2 Screen 3 Display Lap Screen * Indicates the default setting. 1 Displayed after registering the heart rate monitor. Description Use this setting when running or jogging. Use this setting when walking (exercising at a slow pace). Records laps automatically when running a distance set in advance. Set the lap distance. Distance: 0.1 to 10.0 mi (0.1 to 10.0 km) in increments of 0.1 mi (0.1 km) See "Recording laps automatically" on page 36. Automatically stops measuring when you stop running, and resumes when you continue running. See "Starting/stopping measuring automatically" on page 37. Set the target time and pace range for one mile or kilometer. An alarm sounds if you are outside the set pace range. You can set the target pace within the following range. Target Pace: 1'00" to 15'00"/mi or km (in increments of 1 second) Pace Range: 00'05" to 03'00"/mi or km (in increments of 1 second) See "Setting a pace" on page 39. You can measure your heart rate by wearing the optional heart rate chest strap. See "Measuring heart rate" on page 67. Set the alarm type and time (1 to 10 minutes). You can also set this from Sys. Settings. Displays the number of GPS satellites currently communicating with the product. You can display up to three Measurement screens. You can change the screen pattern and the measurement items displayed for each screen. You can also change the Display Lap Screen. See "Screen" on page 80. 75