Epson SF-110 User Manual - Page 23
Making precise measurements, Indoor mode
![]() |
View all Epson SF-110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Setting up your SF-110 The product continues to search for a GPS signal, and starts recording positional information when it successfully synchronizes with a satellite. The route you have travelled before the GPS has synchronized is not recorded, but distance and pace data can still be measured. The product will use the stride sensor until a GPS connection is made. See "Measurable items" on page 31. Indoor mode This function allows you to measure without performing GPS positioning. Your route is not recorded in Indoor mode. The measurements recorded by your product are also limited in Indoor mode. See "Measurable items" on page 31. Use either of the following methods to enter indoor mode. O Press C or D to highlight Indoor during GPS positioning, then press A. You will not need to repeat this process again unless you do not use the product for several months. O If GPS positioning fails, press C or D to highlight Indoor on the screen displayed, then press A. Making precise measurements When you use the product for the first time or when the product has not been used for several months, you need to allow the product to completely synchronize with the GPS satellites. Switch to the Measurement screen, then wait outside for at least 15 minutes with no obstructions overhead. Your product will track your movements with greater accuracy after this extended calibration. 23
![](/manual_guide/products/epson-sf110-user-manual-38614da/23.png)