Epson Stylus Pro 4800 Portrait Edition Product Information Guide - Page 4

Epson Stylus Pro 4800 Error Messages When a problem occurs, a message appears on the display and the lights on the control panel come on or flash. Message/Light CHANGE PAPER TYPE COMMAND ERROR Light Paper light on - DRIVER INK SET SETTING IS - WRONG MISMATCH ERROR Note: These messages alternate. Explanation Response Paper loaded does not match the source selected. Press the Paper Source button to select the correct setting: either (for paper in the tray, or or for roll paper). You're using the wrong printer driver. Damaged data was sent to the printer or the data has an incorrect command. The installed printer driver is not correct for the printer. Press the Pause button and hold it for 3 seconds to cancel the print job. Make sure you installed the correct driver for your printer. Press the Pause button and hold it for 3 seconds to cancel the print job. Stop printing, and press the Pause button for 3 seconds. Then make sure that the installed printer driver is correct for the printer. The black ink cartridge option does not match what is selected in the driver Non-Epson genuine ink cartridge is installed. Stop printing, and then press and hold the Pause button for 3 seconds. Select the correct black ink cartridge option in the driver. If you want to continue printing, press the Pause button. Press the Pause button for 3 seconds to cancel printing. If you want to continue printing, press the Pause button. FEED SHEET PAPER FEED SHEET PAPER MANUALLY FORBIDDEN MEDIA FROM P. TRAY INK LOW - - B Ink light flashing INK OUT B Ink light on INVALID INK CRTG B Ink light on Cut sheet needs to be loaded manually. Cut sheet needs to be loaded manually. Ink cartridge(s) are nearly empty (printing continues). Ink cartridge(s) are empty (printing stops). You tried to install the wrong ink cartridge. Load the sheet in the manual feed slot. . Load the sheet in the manual feed slot. Make sure you have replacement cartridges available. Replace the ink cartridge(s) indicated on the LCD panel. If you are installing ink cartridges for the first time, you must install the cartridges that came with your printer. LOAD PAPER LOAD ROLL PAPER LOAD SHEET PAPER IN P. TRAY LOWER INK LEVERS LOWER L (or R) INK LVR MNT REQ. MNT TK NEAR FULL MNT TNK FULL Paper light on Paper light on - If you are replacing ink cartridges, check the package and product code. You must use the ink cartridges designed for your printer. Other cartridges will not work. Paper lever is in the released position After you finish loading paper, pull the paper lever all while loading paper. the way forward, to the secured position. Paper source setting in printer driver is different from control panel. Make sure the right paper is loaded and the paper source setting is the same on the control panel and printer driver. One or both ink levers are raised. Pull the lever or levers down to lock the ink cartridges. - - B Ink light on A printer part will need to be replaced Note the code number and contact Epson. soon. The maintenance tank is almost full. Make sure you have a replacement maintenance tank. The maintenance tank is full. Replace the maintenance tank. 4 - Epson Stylus Pro 4800 8/05