Epson Stylus Pro 4800 Portrait Edition Product Information Guide - Page 6

Epson Stylus Pro 4800 Message/Light UNABLE TO PRINT WRONG INK CRTG WRONG PAPER SIZE Light - B Ink light on Paper light flashing Explanation You tried to print while an error condition was present. You tried to install the wrong ink cartridge. Loaded paper does not match the image size. Response Press the Pause button to exit the SelecType menu system. If the message appears again, clear the error before you print. If you are installing ink cartridges for the first time, you must install the cartridges that came with your printer. If you are replacing ink cartridges, check the package and product code. You must use the ink cartridges designed for your printer. Other cartridges will not work. Make sure the size you selected in the printer driver matches the loaded paper size. Load the correct size paper if necessary. Replacing an Ink Cartridge The easiest way to check ink levels is from the control panel: Tip: You can store partially used ink cartridges for up to 6 months. 1 2 3 4 5 6 7 8 Menu 3sec. 1 Matte Black/ Photo Black Full 2 Cyan 4 Yellow Empty 6 Light Cyan 8 Light Light Black 3 Magenta 5 Light Black 7 Light Magenta When the red B ink light is flashing (and INK LOW is displayed on the LCD panel), the indicated cartridge is almost out of ink. Make sure you have a replacement cartridge. When the light stays on and INK OUT is displayed, the cartridge is empty. You must replace the cartridge before you can continue printing. You can install any combination of 110 ml and 220 ml cartridges. It's a good idea to keep a set of empty 110 ml cartridges on hand at all times in case you need to ship the printer. See page 2 for information on selecting the correct replacement cartridges. Before you start, make sure the printer is turned on. Then follow these steps to replace an ink cartridge: 1. Note the color of the cartridge whose light is on or flashing. This is the cartridge you need to replace. Caution: Leave the empty cartridge in the printer until you are ready to replace it. To prevent ink reporting errors, never replace the ink cartridges with the printer turned off. 2. Press the ink compartment cover to open it. 3. Raise the ink levers to the unlocked position. 6 - Epson Stylus Pro 4800 8/05