Epson SureLab D3000 - Single Roll User Manual - Page 115
Reset, Error ID, Message, What to do, Disposing of Trimmed Waste
View all Epson SureLab D3000 - Single Roll manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Troubleshooting Error ID 2016 2017 2018 2110 2192 2251 2301 to 2304 2306 to 2307 2321 to 2324 2333 to 2334 2311 to 2314 2316 to 2317 2327 to 2330 2335 to 2336 Message The top cover has been opened. There may still be paper inside the printer. Remove paper inside the printer, close the cover, and then click [OK]. The back printing unit has not been installed in the correct position. There may still be paper inside the printer. Remove paper inside the printer, set the back printing unit to the correct position, and then click [OK]. The long paper ejection unit has been opened. There may still be paper inside the printer. Remove paper inside the printer, close the cover, and then click [OK]. The front sorter tray is full. Remove the prints from the sorter tray, and then click [OK]. The cleaning sheet is loaded with the wrong side up. Load the cleaning sheet front-side up, and then click [OK]. The trimmed waste paper box is full. Empty the trimmed waste paper box. After emptying the trimmed waste paper box, click [Reset] to reset the trimmed waste paper box usage. Ink cartridge error. (xx) If the ink cartridge is not set correctly, set it correctly. Please install correct cartridge. Replace ink cartridge: XX, and then click [OK]. Epson recommends the genuine Epson cartridge. Insufficient ink left to perform initial charge: (xx) Replace ink cartridge, and then click [OK]. What to do Remove paper inside the printer, close the top cover. If an error is displayed on the Client PC, click OK. U "When the Paper Jams" on page 120 Remove paper inside the printer, set the back printing unit to the correct position, and then click OK. U "When the Paper Jams" on page 120 Remove paper inside the printer, close the long paper ejection unit cover. If an error is displayed on the Client PC, click OK. U "When the Paper Jams" on page 120 Remove paper from the sorter tray. If an error is displayed on the Client PC, click OK. When the error does not clear even after removing the paper, hold down the Sorter Drive Switch for 10 seconds to move the sorter tray to the appropriate position. U "Problems with the Sorter" on page 134 Load the Cleaning Sheet front-side up, and close the cover. If an error is displayed on the Client PC, click OK. Empty the trimmed waste paper box. After emptying the trimmed waste paper box, click Reset to reset the trimmed waste paper box usage. U "Disposing of Trimmed Waste Paper" on page 66 Check the ink cartridge for the color displayed in (xx), replace or reset the ink cartridge, and close the cover. If an error is displayed on the Client PC, click OK. U "Replacing Ink Cartridges" on page 57 Replace the ink cartridge for the color displayed in (xx), and close the cover. If an error is displayed on the Client PC, click OK. U "Replacing Ink Cartridges" on page 57 115