Epson SureLab D3000 - Single Roll User Manual - Page 20
Starting up and Shutting down the Printer, Starting up the Printer
View all Epson SureLab D3000 - Single Roll manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Starting up and Shutting down the Printer Starting up and Shutting down the Printer Starting up the Printer Click Pre-operation Check on the Client PC to start the printer. In Pre-operation Check, the printer starts after the items that need to be checked manually have been displayed. When Printer PC is connected to the printer, Printer PC starts automatically. The Power switch on the back of the printer should normally be On (the light is on). If the Power switch is turned off, check that the power cable is inserted in the AC inlet, and then turn on the Power switch (the light turns on). Tip: Normally, you do not need to operate the humidity control unit power switch. See the following for more information on using the humidity control unit. U "Adjusting the Humidity in the Roll Paper Feeder" on page 74 A Start the SL-D3000 Maintenance Utility. You can use one of the following methods to display the pre-operation check screen. On the Client PC, click Start - All Programs - EPSON SL-D3000 System Application - Maintenance Utility. 20