Epson SureLab D3000 - Single Roll User Manual - Page 35
Place the other Flange on the other end of the paper.
View all Epson SureLab D3000 - Single Roll manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Replacing Paper B Set the Flange on the paper surface from which paper particles have been wiped away. Place the paper straight to the Flange. Tip: Either Flange can be set. C Position the paper so that the surface to which the Flange has not been set is face up. Next, wipe away paper particies with a damp cloth. D Place the other Flange on the other end of the paper. Align the triangular marks on the flanges as shown in the illustration below. E Place the Spindle unit on its side so that the paper is in the position shown below. 35
Replacing Paper
35
B
Set the Flange on the paper surface from which paper particles have been wiped away.
Place the paper straight to the Flange.
C
Position the paper so that the surface to which the Flange has not been set is face up.
Next, wipe away paper particies with a damp cloth.
D
Place the other Flange on the other end of the paper.
Align the triangular marks on the flanges as shown in the illustration below.
E
Place the Spindle unit on its side so that the paper is in the position shown below.
Tip:
Either Flange can be set.