Epson SureLab D3000 - Single Roll User Manual - Page 26
Replacing Paper, Genuine Epson Paper
View all Epson SureLab D3000 - Single Roll manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Replacing Paper Replacing Paper This section explains how to use genuine Epson paper, and how to remove paper from the roll paper feeder and load new paper. Tip: O When paper is out, use the paper status lights on the Operation panel to check which roll paper feeder is empty. O If the edges of the paper are torn, use scissors to cut the paper so that it is straight, and then load the paper. O You need to make the following preparations if you want to replace the paper with paper of the same width and type. O Before replacing, make a note of the amount remaining for the current paper O When replacing the paper, set the amount of paper remaining after replacement from the Client PC If the remaining amount of paper is not set correctly, the paper level is not displayed correctly. U "Paper Settings" on page 84 O Rear roll paper feeder operations differ from front roll paper feeder operations. See the following for more information. U "Replacing Paper in the Rear Roll Paper Feeder" on page 30 U "Replacing Paper in the Front Roll Paper Feeder" on page 43 O Only the Dual Roll Model supports front roll paper. For the Single Roll Model, see the information for rear roll paper. Genuine Epson Paper For optimum print quality, we recommend using the following genuine Epson paper. Professional Photo Paper Glossy Professional Photo Paper Luster For more details about genuine Epson paper, see the following sections. U "Consumables and Optional Products" on page 138 26