Epson SureLab D3000 - Single Roll User Manual - Page 141
Warning, Ink Specifications, Maintenance Tank Specifications, Safety and Approvals
View all Epson SureLab D3000 - Single Roll manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Appendix Safety and Approvals EMC FCC part 15 subpart B class A CAN/CSA-CEI/IEC CISPR 22 Class A AS/NZS CISPR 22 Class A EMC Directive 2004/108/EC EN 55022 Class A EN 55024 EN 61000-3-2 EN 61000-3-3 ! Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Type Ink type Use by date Print quality guarantee expiry Storage temperature Capacity Cartridge dimensions (W x D x H) Ink Specifications Ink Cartridges Water-based ink Three years from date of production Six months from installation In packaging: −4 to 104 °F (−20 to 40 °C); 1 month at 104 °F (40 °C) Installed: −4 to 104 °F (−20 to 40 °C); 1 month at 104 °F (40 °C) Transporting: −4 to 140 °F (−20 to 60 °C); 1 month at 104 °F (40 °C), and 72 hours at 140 °F (60 °C) 700 ml 1.6 x 12.6 x 4.2 inches (40 x 320 x 107 mm) Note: O The ink freezes if left at below 5°F (-15°C) for a long time. If it does freeze, leave it at room temperature (77 °F [25 °C]) for at least four hours (without condensation). O Do not disassemble or refill the ink cartridge. Type Number installed Environmental Conditions Cartridge dimensions (W x D x H) Maintenance Tank Specifications Maintenance tank for waste ink 1 In packaging: −4 to 104 °F (−20 to 40 °C) temperature, 20 to 85% humidity Installed: Follows general specifications Transporting: −4 to 140 °F (−20 to 60 °C) temperature, 5 to 85% humidity; 1 month at 104 °F (40 °C), and 120 hours at 140 °F (60 °C) 4 x 9.3 x 3.1 inches (102.5 x 235 x 79.5 mm) 141