Epson SureLab D3000 - Single Roll User Manual - Page 30

Replacing Paper Paper Feed Section The configuration for the paper feed section of the printer changes depending on the model. Although all models are equipped with a rear roll paper feeder, only the Dual Roll Model is equipped with a front roll paper feeder. Also, the type of paper supported and the capacity differs for each type of feeder as shown in the following table. Paper Feed Section Front roll paper feeder Rear roll paper feeder Supported Paper Types Professional Photo Paper Glossy Professional Photo Paper Luster Professional Photo Paper Glossy Professional Photo Paper Luster Available Paper Width 4 to 8 inches (102 to 203 mm) 4 to 12 inches (102 to 305 mm) Notes when Loading Paper O When using the paper for the first time after purchase, we recommend cutting off approximately 3 ft (1 meter) before use. Depending on the paper's transportation environment, the print quality may decline for this first part of the paper. Replacing Paper in the Rear Roll Paper Feeder Removing Paper A Prepare the following items. Items New paper for loading A linen or vinyl cloth Gloves Explanation You can load the following genuine Epson paper in the rear roll paper feeder. Professional Photo Paper Glossy Professional Photo Paper Luster To avoid soiling the paper, place the Spindle unit on the cloth when loading/removing the paper. Wear gloves to avoid soiling the paper when handling it. 30