Epson SureLab D700 Operation Guide - Page 30
Placing Roll Paper on the Spindle
View all Epson SureLab D700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Replacing Paper Placing Roll Paper on the Spindle A Remove the new paper from its packaging and stand it on a flat surface. Wipe the edge of the paper with a soft, clean cloth several times to remove any dust. Flip the paper roll and repeat the process. B Place the paper roll on the spindle so that the paper winds clockwise. C Insert the gray adapter onto the spindle and press down until there is no gap between the adapter and the roll paper. 30
Replacing Paper
30
Placing Roll Paper on the Spindle
A
Remove the new paper from its packaging and stand it on a flat surface. Wipe the edge of the paper with a
soft, clean cloth several times to remove any dust. Flip the paper roll and repeat the process.
B
Place the paper roll on the spindle so that the paper winds clockwise.
C
Insert the gray adapter onto the spindle and press down until there is no gap between the adapter and the roll
paper.