Epson SureLab D700 Operation Guide - Page 93

Problems when Cutting Paper, Problems when Loading Paper

Get Epson SureLab D700 PDF manuals and user guides View all Epson SureLab D700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

Troubleshooting Cause The printed surface is scuffed or soiled. The paper is creased. What to do Is the paper too thick or too thin? Check that the paper can be used with this printer. See "Printer Specifications" on page 95. Are you using the printer at normal room temperature? The printer should be used at normal room temperature (temperature: 59 to 77 °F [15 to 25 °C], humidity: 40 to 60 %). For information about paper such as thin paper from other manufacturers that requires special handling, see the documentation supplied with the paper Problems when Cutting Paper Cause The cut is crooked, the cut edge is frayed or turned up, or the coating is cracked. Contact Epson support. Problems when Loading Paper What to do Cause The paper light won't light up and the paper won't load in the paper feed slot. What to do Did you rotate the paper feed knob clockwise? Turn the knob counter clockwise and then try to load the paper again. 93

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
Troubleshooting
93
Problems when Cutting Paper
Problems when Loading Paper
The printed surface is scuffed or soiled.
Is the paper too thick or too thin?
Check that the paper can be used with this printer.
See
“Printer Specifications” on page 95.
The paper is creased.
Are you using the printer at normal room temperature?
The printer should be used at normal room temperature (temperature: 59 to 77
°F [15 to 25 °C], humidity: 40 to 60 %). For information about paper such as thin
paper from other manufacturers that requires special handling, see the
documentation supplied with the paper
Cause
What to do
The cut is crooked, the cut edge is frayed
or turned up, or the coating is cracked.
Contact Epson support.
Cause
What to do
The paper light won’t light up and the
paper won’t load in the paper feed slot.
Did you rotate the paper feed knob clockwise?
Turn the knob counter clockwise and then try to load the paper again.
Cause
What to do