Epson SureLab D700 Operation Guide - Page 96
Paper Feeder Specifications, Ink Specifications, Maintenance Tank Specifications
View all Epson SureLab D700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Appendix Power consumption Electrical Specifications Operating: Approximately 120 W Sleep mode: Approximately 6 W Power off: Less than 0.5 W Operating: Approximately 120 W Sleep mode: Approximately 6 W Power off: Less than 0.5 W Paper core size Paper length Paper width Type Ink type Use by date Storage temperature Capacity Cartridge dimensions Paper Feeder Specifications Roll paper feeder (3 inch core diameter): Outer diameter less than 6.7 inches (170 mm) 3.5 to 39.4 inches (89 to 1,000 mm) 4 inches (102 mm), 5 inches (127 mm) , 6 inches (152 mm), 8 inches (203 mm), A4 (210 mm) Ink Specifications Ink cartridges Six color water-based dye Three years after manufacture In the packaging: -4 to 104 °F (-20 to 40 °C), within one month at 104 °F (40 °C) Installed in printer: -4 to 104 °F (-20 to 40 °C), within one month at 104 °F (40 °C) Transporting: -4 to 140 °F (-20 to 60 °C), within one month at 104 °F (40 °C); 72 hours at 140 °F (60 °C) 200 ml 1.0 inch (25 mm) W x 7.9 inches (200 mm) D x 3.9 inches (100 mm) H c Important: ■ The ink freezes if left at below 5 °F (-15 °C) for a long time. If it does freeze, leave it at room temperature (77 °F [25 °C]) for at least four hours until it has defrosted (without condensation). ■ Do not disassemble the ink cartridges or refill the ink. Type Number installed Environmental conditions Tank dimensions Maintenance Tank Specifications Maintenance tank for waste ink. 1 In the packaging: 4 to 104 °F (-20 to 40 °C), 20 to 85% humidity Installed in printer: Conforms to the general specifications below Transporting: -4 to 140 °F (-20 to 60 °C) 20 to 85% humidity; within 120 hours at 140 °F (60 °C), one month at 104 °F (40 °C) 3.1 inches (78.8 mm) W x 10.0 inches (254.5 mm) D x 1.5 inches (38.5 mm) H Temperature Humidity General Specifications Operating: 50 to 95 °F (10 to 35 °C) Storage (before unpacking): -4 to 140 °F (-20 to 60 °C); within 120 hours at 140 °F (60 °C), one month at 104 °F (40 °C) Storage (after unpacking): -4 to 104°F (-20 to 40 °C); within one month at 104 °F (40 °C) Operating: 20 to 80% (without condensation) Storage (before unpacking): 5 to 85% (without condensation) Storage (after unpacking): 5 to 85% (without condensation) 96