Epson SureLab D700 Operation Guide - Page 78
Message, What to do, genuine Epson products.
![]() |
View all Epson SureLab D700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Troubleshooting Code E-9901(xxxx), E-9902(xxxx) I-5201 W-2206 W-2207 W-2208 Message What to do A printer system error occurred. Delete all print jobs remaining in the operating system's print queue. Turn the printer off. Check if there is any paper remaining inside the printer, and then turn the printer back on. Contact service support if the error continues to occur. Restart the printer. If the error persists, contact Epson support. Amount of data in print jobs sent to printer nearly at maximum limit. Stop sending the current print job and send the remaining pages as another print job. The print job is too large. Split up the data and try printing again. You have not installed genuine Epson ink cartridges. xxxx Information about ink levels may not be displayed, and use of non-genuine ink is recorded for possible use in service support. For optimum quality and reliability Epson recommends using genuine Epson ink. This printer is developed for use with genuine ink cartridges. If you use non-genuine cartridges, the print result may be faint, or the ink remaining may not be detected normally. We recommend using genuine Epson products. A non-genuine or refilled cartridge has been detected. Ink levels may not be shown because of unknown ink volume. A non-genuine or refilled cartridge has been detected. Ink levels may not be shown because of unknown ink volume. 78
![](/manual_guide/products/epson-surelab-d700-operation-guide-8b95dec/78.png)