Epson TM-T88V TM-T88V Technical Reference Guide - Page 30
Connecting the AC adapter, Insert the connector of the power supply cable onto the power supply
View all Epson TM-T88V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Connecting the AC adapter Use the Epson PS-180 or an equivalent product as the AC adapter. WARNING If the printer emits smoke, fire, heat, any strange odor, or unusual noise, turn off the power immediately and unplug the equipment. Connecting the AC adapter 1 Make sure the printer's power is turned off. 2 Connect the AC cable to the AC adapter. AC adapter AC cable 3 Insert the connector of the power supply cable onto the power supply connector (stamped 24V). When removing the DC cable for the AC adapter from the printer, check that the AC cable is not connected, and then grasp the arrow marked section of the connector and pull it straight out. Connector arrow marked section 30
30
Connecting the AC adapter
Use the Epson PS-180 or an equivalent product as the AC adapter.
Connecting the AC adapter
1
Make sure the printer’s power is turned off.
2
Connect the AC cable to the AC adapter.
3
Insert the connector of the power supply cable onto the power supply
connector (stamped
24V
).
WARNING
If the printer emits smoke, fire, heat, any strange odor, or unusual noise, turn off the
power immediately and unplug the equipment.
When removing the DC cable for the AC adapter from the printer, check that the AC cable
is not connected, and then grasp the arrow marked section of the connector and pull it
straight out.
AC adapter
AC cable
Connector arrow marked section