Epson TM-T88V TM-T88V Technical Reference Guide - Page 66
Selecting interface mode, Setting the number of head energizing parts
View all Epson TM-T88V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Selecting interface mode Selectable from: automatic selection, fixed to UB interface, or fixed to built-in USB. Those 3 modes are described in both tables below. The TM-T88V has dual interfaces: a built-in USB interface and another interface selected by the customer. (The selectable interface is referred to as the "UB" interface.) The table below describes the modes you can set for the printer to control the dual interfaces. For models with serial/parallel UB Interface mode Automatic selection (default setting) Fixed to UB Fixed to built-in USB UB Available Available Not available Built-in USB Available Not available Available For models with other UB Interface mode Automatic selection (default setting) Fixed to UB Fixed to built-in USB UB Available Available Not available Built-in USB Not available Not available Available Automatic selection: The interface of either the UB or built-in USB to which data is transmitted first is selected. Once the interface is selected, the selection is enabled until the power is turned off or the printer is reset. Setting the number of head energizing parts • One-part energizing (default setting) • Two-part energizing • Four-part energizing • Usually, the number of head energizing parts does not need to be changed. • The maximum print speed (300 mm/s) can be performed only when one-part energizing is selected. 66