Epson TM-T88V TM-T88V Technical Reference Guide - Page 35
For USB Interface, Connecting the built-in USB interface cable
View all Epson TM-T88V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 2 Setup For USB Interface If you want to communicate via the built-in USB interface when you use a model with an interface other than the serial/parallel interface, you need to change the interface mode with the memory switch (customized value). To set the memory switch (customized value), see "Setting the Memory Switches (Customized Value)" on page 63. Connecting the built-in USB interface cable 1 Put the USB cable on the hook as shown in the figure, then connect it firmly to the built-in USB interface connector. 2 Connect the other connector of the cable to the host computer. Built-in USB interface connector 2 USB cable Hook 35
Chapter 2
Setup
35
2
For USB Interface
Connecting the built-in USB interface cable
1
Put the USB cable on the hook as shown in the figure, then connect it
firmly to the built-in USB interface connector.
2
Connect the other connector of the cable to the host computer.
If you want to communicate via the built-in USB interface when you use a model with an
interface other than the serial/parallel interface, you need to change the interface mode
with the memory switch (customized value). To set the memory switch (customized value),
see
"Setting the Memory Switches (Customized Value)" on page 63
.
USB cable
Hook
Built-in USB interface connector