Epson TM-T88V TM-T88V Technical Reference Guide - Page 57
DIP Switch Bank 2, Transmission Speed DIP Switches 1-7/1-8
View all Epson TM-T88V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Chapter 4 Advanced Usage Transmission Speed (DIP Switches 1-7/1-8) Transmission speed (bps: bits per second) Depends on the memory switches (customized value) settings.* 4800 9600 (default) 19200 SW 1-7 ON OFF ON OFF SW 1-8 ON ON OFF OFF bps: bits per second * The default value of transmission speed set with memory switches (customized value) is 38400 bps. (See "Setting the Memory Switches (Customized Value)" on page 63.) Depending on print conditions, such as print duty, print head temperature, and data transmission speed, print speed is automatically adjusted, which can cause white lines due to intermittent print (the motor sometimes stops). To avoid this, set the transmission speed higher or keep the print speed constant by setting it lower. DIP Switch Bank 2 SW Function ON OFF Default setting • Offline 2-1 Handshaking (BUSY condition) Receive buffer full OFF • Receive buffer full Reserved (Do not change 2-2 Fixed to OFF OFF setting) 2-3 ∼ See "Selecting the Print Density (DIP Switches Selects print density OFF 2-4 2-3/2-4)" on page 62. Releases the BUSY Releases the BUSY 4 Sets the release condition of the state when the state when the receive buffer BUSY state. (This 2-5 remaining capacity remaining capacity OFF function is effective when DIP of the receive buffer of the receive buffer Switch 1-2 is set to off.) reaches 138 bytes. reaches 256 bytes. Reserved (Do not change 2-6 Fixed to OFF OFF setting) 2-7 I/F pin 6 reset signal Enabled Disabled OFF 2-8 IF pin 25 reset signal Enabled Disabled OFF • For DIP Switch 2-1 (BUSY condition), see also "Selecting the BUSY Status" on page 62. • When you use the APD, change the setting of DIP switch 2-1 (BUSY condition) to ON. 57