Epson TM-T88V TM-T88V Technical Reference Guide - Page 83

Chapter 6 Replacement of the TM-T88IV Replacement of the TM-T88IV The TM-T88V is designed so that it can smoothly replace the TM-T88IV. This chapter describes precautions for the replacement. Compatibility Printing The printing and character specifications are the same as those of the TM-T88IV. Without special configurations, the TM-T88V prints the same results as the TM-T88IV prints. Print Density The print density of the TM-T88V can be set with DIP switches (2-3/2-4) as can the TM-T88IV. Set the density the same as for the TM-T88IV to print in the same print density. The print density can be set also with a customized value. The default setting of the customized value is "Depends on the DIP switch settings." If the customized value is changed, the value set with the customized value is enabled. (See "Setting the Memory Switches (Customized Value)" on page 63.) Two-Color Printing You cannot use the paper for two-color printing (P320RB/P320BB) with the TM-T88V, which you can use with the TM-T88IV. Number of Head Energizing Parts For the TM-T88V, the default setting of the number of head energizing parts is "One-part 6 energizing." You can change the setting with the customized value (See "Setting the Memory Switches (Customized Value)" on page 63.); however it does not usually need to be changed. Number of head energizing part TM-T88V • One-part energizing • Two-part energizing • Four-part energizing TM-T88IV • One-part energizing • Two-part energizing • Four-part energizing • Auto energizing 83