Epson TM-T88V TM-T88V Technical Reference Guide - Page 37
Y connection only with the UB-U01III/U02III
View all Epson TM-T88V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter 2 Setup Customer display connection Y connection (only with the UB-U01III/U02III) This printer is connected to the host computer via the USB port. When a customer display (DM-D) is to be connected, connect it to the printer via the modular cable. • Make sure to pull out the power cable before connecting cables. • When connecting a customer display to the printer, connect the modular jack from the customer display to the DM connector. • Set the communication conditions of the customer display as follows: ∗ Baud rate: 19200 bps ∗ Bit length: 8-bit ∗ Parity: no parity ∗ Stop bit: 1 USB cable Modular cable 2 TM-T88V DM-D 37
Chapter 2
Setup
37
2
Customer display connection
Y connection (only with the UB-U01III/U02III)
This printer is connected to the host computer via the USB port. When a customer display
(DM-D) is to be connected, connect it to the printer via the modular cable.
•
Make sure to pull out the power cable before connecting cables.
•
When connecting a customer display to the printer, connect the modular jack from the
customer display to the DM connector.
•
Set the communication conditions of the customer display as follows:
∗
Baud rate: 19200 bps
∗
Bit length: 8-bit
∗
Parity: no parity
∗
Stop bit: 1
TM-T88V
DM-D
USB cable
Modular cable