Epson TM-T88V TM-T88V Technical Reference Guide - Page 43
Connecting the Optional External Buzzer, Installing a Buzzer, Printer Settings
View all Epson TM-T88V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 2 Setup Connecting the Optional External Buzzer You can use the optional external buzzer (OT-BZ20) by connecting it to the drawer kick connector. You need to change the printer settings to make sure that it can be used. • The optional external buzzer and the cash drawer cannot be used together at the same time. Do not connect them both to the printer at the same time by using a branch cable. • If you enable the optional external buzzer, the cash drawer cannot be operated even if it is connected. • You cannot use the built-in buzzer and the optional external buzzer. When using an optional external buzzer on a model with a built-in buzzer, set the DIP switches for the built-in buzzer to "Do not operate" for each drawer kick connector pin 2/pin 5. Installing a Buzzer See the buzzer's user's manual for details on installing the buzzer. 2 Printer Settings The optional external buzzer is disabled by default. Follow the steps below to change the memory switch (custom values) to make sure it is enabled. Changing Settings Using the Utility 1 Start the APD5 Utility or TM-T88V Utility. For details, see the "Advanced Printer Driver Ver.5 Printer Manual" or the "TM-T88V Utility User's Manual". 2 Click "Option Buzzer" from the menu, and then select "Use Buzzer". 3 Set the timing and beep pattern for the optional buzzer as necessary. 43