Epson TM-T88V TM-T88V Technical Reference Guide - Page 64
Functions
View all Epson TM-T88V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
• To directly configure the printer in the memory switch setting mode, see "Memory Switch Setting Mode" on page 71. • For detailed information about the TM-T88V Utility, see the TM-T88V Utility User's Manual. • For detailed information about ESC/POS commands, see the ESC/POS Application Programming Guide. Functions Setting the paper width • 80 mm (default setting) • 58 mm • Be sure to install the roll paper guide when you select the 58 mm paper width. (See "Changing the Paper Width" on page 27.) • Once you change the paper width from 80 mm to 58 mm, you cannot change it back to 80 mm. Setting the print density Selectable from levels 1 to 13 (70% ∼ 130%) The print density can be set with DIP switches (2-3/2-4) or the customized value. (See "Selecting the Print Density (DIP Switches 2-3/2-4)" on page 62.) The default setting of the customized value is "Depends on the DIP switch settings." If the customized value is changed, the value set with the customized value is enabled. Setting the multi-tone print density Selectable from levels 1 to 13 (70% ∼ 130%) • First change the print density, and then configure the Multi-tone print density. • If you set the density too high, the contrast becomes lower. Select the density level checking the overall tone balance of your image. 64