Epson V11H128020 User Manual - Page 48
Vertical stripes appear in the image, Image is distorted / Image contains interference, Tracking See
UPC - 010343847408
View all Epson V11H128020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
When You Suspect a Problem 48 Vertical stripes appear in the image • Has the "Trackingg" setting been adjusted? Set the tracking value until the vertical stripes disappear. ([Menu] button → "Image" → "Picture Quality" → "Tracking") See "Image menu" on page 36. Image is distorted / Image contains interference • Have the "Sync.g," "Trackingg" and "Position" settings been adjusted correctly? • Are the image signal format settings correct? • Has the correct resolution been selected? • Is an extension cable being used? • Are the cables connected correctly? If the configuration menu "Image" → "Auto Setup" setting has been set to "OFF," press the [Auto] button on the remote control to adjust these settings. If the images have not been correctly adjusted after pressing the [Auto] button and using the automatic setup function, adjust the settings manually in their respective menus. ([Menu] button → "Image" → "Picture Quality" → "Sync.") See "Image menu" on page 36. • When a computer or Component Videog device is connected, select the appropriate setting for the input source you are using, in the "Image" → "Input Signal" configuration menu. • When a Composite Videog or S-Videog device is connected, select the appropriate setting for the video system you are using in the "Setting" → "Video Signal" configuration menu. Set the computer so that the signals that are output are compatible with this projector. Refer to your computer's documentation for further details. See "Supported Display Resolutions" on page 64. If using an extension cable, electrical interference may affect the signals. Confirm that you are using a shielded cable. See "Connecting to a Computer" on page 14, "Connecting to Video Equipment" P.20.