Epson V11H128020 User Manual - Page 59
Replacing the air filter, Push in the tab on the air filter cover and lift up the air filter cover
![]() |
UPC - 010343847408
View all Epson V11H128020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Projector Care 59 3 Use the [l][r] buttons to select "Yes," then press the [e] button. 3 Replace the air filter with a new one. Take out the old air filter and install the new one. Please ensure there are no gaps between the air filter and the plastic grill. The lamp operating time will be reset. Replacing the air filter Replacing the air filter can also be performed when the projector is mounted to a ceiling. 1 Turn off the projector power, wait for the cool-down period to end, then disconnect the power cable. Cool-down takes about 20 seconds. 2 Push in the tab on the air filter cover and lift up the air filter cover to remove it. 4 Replace the air filter cover. First insert the tabs, and then press down on the opposite side until it clicks into place. p Dispose of used air filters properly in accordance with your local regulations.
![](/manual_guide/products/epson-v11h128020-user-manual-e629adc/59.png)