Epson V11H128020 User Manual - Page 58

Resetting the lamp operating time, replacement period,

Get Epson V11H128020 - PowerLite S1 SVGA LCD Projector PDF manuals and user guides
UPC - 010343847408
View all Epson V11H128020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Projector Care 58 7 Replace the lamp cover. First insert the tabs, and then press down on the opposite side until it clicks into place. Resetting the lamp operating time The projector has a built-in counter which keeps track of the lamp operating time and causes the replacement warning message to be displayed when the cumulative operating time reaches a certain point. Therefore, the counter needs to be reset from the configuration menu, after the lamp has been replaced with a new one. p Please do not reset the lamp operating time except when the lamp has been changed. Otherwise, the lamp operating time will not be displayed correctly. 1 Turn on the power and press the [Menu] button. p • Install the lamp securely. If the lamp cover is removed, the lamp turns off automatically as a safety precaution. The lamp will not turn on if the lamp or the lamp cover is not installed correctly. • After replacing the lamp, be sure to reset the lamp operating time. • New air filters are included with replacement lamps. The air filter should also be replaced when the lamp is replaced. See "Lamp replacement period" on page 56. • Dispose of used lamps properly in accordance with your local regulations. 2 Select "Lamp Hours Reset" from the "Reset" menu, using the [u][d][e] buttons.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
58
Projector Care
7
Replace the lamp cover.
First insert the tabs, and then press down on the opposite side until it
clicks into place.
Resetting the lamp operating time
The projector has a built-in counter which keeps track of the lamp operating
time and causes the replacement warning message to be displayed when the
cumulative operating time reaches a certain point. Therefore, the counter
needs to be reset from the configuration menu, after the lamp has been
replaced with a new one.
1
Turn on the power and press the [Menu] button.
2
Select “Lamp Hours Reset” from the “Reset” menu, using the
[
u
][
d
][
e
] buttons.
p
• Install the lamp securely. If the lamp cover is removed, the lamp
turns off automatically as a safety precaution. The lamp will not
turn on if the lamp or the lamp cover is not installed correctly.
• After replacing the lamp, be sure to reset the lamp operating time.
• New air filters are included with replacement lamps. The air filter
should also be replaced when the lamp is replaced. See
“
Lamp
replacement period
” on page 56
.
• Dispose of used lamps properly in accordance with your local
regulations.
p
Please do not reset the lamp operating time except when the lamp has
been changed. Otherwise, the lamp operating time will not be displayed
correctly.