Epson V11H128020 User Manual - Page 56
Replacing consumables
![]() |
UPC - 010343847408
View all Epson V11H128020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Projector Care 56 Replacing consumables Changing the battery (Remote Control, Presentation Remote Control) Replacement battery: 1 × CR2025 lithium battery 3 Replace the battery holder. Press the battery holder in until it clicks. c Keep batteries away from children to avoid the risk of accidents. If a child swallows the battery, contact your doctor immediately. 1 Remove the battery holder. While pressing the catch of the battery holder inwards, pull the battery holder out. p Please dispose of used batteries in accordance with local waste disposal regulations. Lamp replacement period ◗ It is time to change the lamp when the "Replace Lamp" message appears in the bottom left hand corner of the screen at the commencement of projection and remains for 30 seconds. ◗ It is also time to change the lamp when the Warning indicator flashes red at 0.5 second intervals. 2 Remove the old battery and insert the new one. Check the position of the (+) mark inside the battery holder to ensure that the battery is inserted the correct way. p • The replacement message will appear after about 1900 hours of use. Lamp life will vary depending on the mode selected, environmental conditions, and usage. • When this message is displayed, please replace the lamp as quickly as possible. • The lamp may explode if you continue to use it beyond the lamp replacement period. • Some lamps may stop operating before the replacement message is displayed. It is recommended that you have a replacement lamp ready in case this happens. • Replacement lamps can be purchased at your nearest dealer.
![](/manual_guide/products/epson-v11h128020-user-manual-e629adc/56.png)