Epson V11H341020 User's Guide - Page 54
Wireless Network Projection, IP Address, Subnet, Gateway Address, Enter, IP Address Display
UPC - 010343874749
View all Epson V11H341020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
PowerLite 1915/1925W 9. Select your IP Settings as necessary: • If your network assigns addresses automatically, turn on the DHCP setting. • If you must set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address as needed. Note: To highlight the numbers you want from the displayed keyboard, press the arrow buttons on the remote control. To select a highlighted number, press Enter. 10. To prevent display of the IP address on the standby screen, turn off IP Address Display. Parent topic: Wired Network Projection Wireless Network Projection You can send images to your PowerLite 1915/1925W projector through a wireless network. To do this, you must install the Epson 802.11g/b/a wireless LAN module, and then set up your projector and computer for wireless projection. There are two ways to connect the projector to your wireless network: • Using the optional Epson Quick Wireless USB Connection key. • Configuring the connection manually using the projector's Network menus. 54