Fluke 345 FE 345 Users Manual - Page 30
Design and Functions - review
![]() |
View all Fluke 345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
345 Users Manual W X Warning • Use only the power supply, Battery Charger/Power Adapter (Model BE345). • Before use check that the selected voltage range indicated on the BE345 matches the local line power voltage and frequency (refer to Figure 2). If necessary, set the slider switch of the BE345 to the correct voltage. • For the BE345, use only ac line plug adapters or ac line cords that comply with local safety regulations. The power (mains) source must conform to the following input ranges/values: • Euro/UK adapter: 210...264 VAC, 47...53 Hz/ 8 VA • US Adapter: 100...120 VAC, 57...63 Hz/ 8VA Figure 3 shows the power adapter and USB ports for the Clamp Meter. USB Figure 3. Power Adapter and USB Connection eln03.eps Voltage measuring inputs should be disconnected before attaching the USB cable to a PC. Saved data may be downloaded to a PC using the supplied USB cable; review saved data using the software included on the CD. Design and Functions This section provides an overview of the terminals, ports, and interfaces of the Clamp Meter, as well as a list of display and operating devices, and a brief introduction to the basic functions. 16
![](/manual_guide/products/fluke-345-fe-345-users-manual-862f3a3/30.png)