Fluke 345 FE 345 Users Manual - Page 63
with respect to the fundamental H 1, since the Clamp Meter supports THD
View all Fluke 345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Power Quality Clamp Meter Measurement Function Overview The second screen shows the fundamental voltage ac (V ac [1]) and %THD as shown in the following display. eln33.bmp As shown below in the A Harmonics screen, AUTO indicates the percentage is automatically scaled to the max of H (2) and above. Pressing the H key for 3 seconds allows the scaling between values of 100 %, 40 %, 10 %, or 4 %, and then back to AUTO. The automatic scaling feature is necessary, as theoretically any harmonic beyond the fundamental can be as high as 600 % with respect to the fundamental (H (1)), since the Clamp Meter supports THD to 660 %. While 100 % can never be exceeded if %RMS is chosen from the menu, the scale could go as high 700 % if harmonic type %H1 had been selected. A scaling above 100 % is only available in the AUTO mode, where the scaling could be 200, 300, 400, 500, 600, or 700 % full scale. 49