Fluke 345 FE 345 Users Manual - Page 51
Step 1 - Instrument Setup, Logging. If power to the adaptor is interrupted during the recording
![]() |
View all Fluke 345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Power Quality Clamp Meter Measurements Note The Auto ranging option is initially highlighted, although it is recommended that the Auto ranging be switched off. Otherwise, if the instrument re-ranges during the recording scaling, there may be a gap in the recording as the instrument stabilizes. Step 1 - Instrument Setup: To setup the instrument: 1. Select an item using JK andFG. 2. Press H to go to the next step as shown in the following display. eln21.bmp 3. The battery save function may also be activated or deactivated in this screen. 4. Press H to go to the next step. Note It is recommended that the power adaptor be connected during Logging. If power to the adaptor is interrupted during the recording, the Clamp Meter internal batteries will continue to power the instrument. 37
![](/manual_guide/products/fluke-345-fe-345-users-manual-862f3a3/51.png)