Fujitsu S510 Getting Started Guide - Page 25

6. Consumables/Carrier Sheet This chapter describes how to replace and purchase consumables and regular replacement parts. WARNING Fire/Electric Shock Before you replace the consumables, disconnect the AC adapter from the power outlet to turn off the scanner. 6.1. Part Numbers and Replacement Cycle of Consumables The following table lists the part numbers of consumables and shows rough guidelines for replacing these parts. No. Description 1 Pad ASSY 2 Pick roller P/N PA03360-0002 PA03360-0001 Replacement Cycle 50,000 scan or one year 100,000 scans or one year These replacement cycles are rough guidelines when A4/Letter wood-free paper 64 g/m2 (17 lb) is used. The actual cycle may differ depending on the scanned paper. Use only the consumables specified by PFU LIMITED. To estimate when the consumables will have HINT to be replaced and to get an overlook of the already scanned pages, refer to the following: 1. Right-click the "ScanSnap Manager" icon S on the task bar. 2. Click [Check consumable supplies] at the menu. 6.2. Replacing the Pad ASSY Replace the Pad ASSY following the procedure below. 1. Remove the documents on the Paper chute. 2. Open the ADF while pulling the Cover open lever. Paper chute ADF Cover open lever 3. Remove the Pad ASSY. Pull out the Pad ASSY in the direction of the arrow while pinching both ends of the Pad ASSY. Pad ASSY ADF (The window ("Check consumable status" screen) that indicates how many times consumables have been used will be displayed. 4. Attach the new Pad ASSY. Pad ASSY ADF Replace the consumables referring to "Target value to change supplies" as a rough guideline. For details about consumables and where to purchase them, visit the following Website or contact the Fujitsu scanner dealer where you purchased your scanner. [Website] http://scansnap.fujitsu.com/ Make sure that the Pad ASSY is completely attached. Otherwise, document jams or other feeding errors may occur. ScanSnap S510 Getting Started | 23