Fujitsu S510 Getting Started Guide - Page 26
Replacing the Pick Roller - replacement rollers
UPC - 097564307218
View all Fujitsu S510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
5. Close the ADF. ADF 3. Adjust the Side guide to the "A5" size. A5 A5 You should hear the ADF click when it returns to its original position. 6. Turn on the scanner. ScanSnap Manager icon changes from to S . 7. Right-click the "ScanSnap Manager" icon S on the task bar, and select [Check consumable supplies] from the menu. 8. In the "Check consumable status" window, click the [Reset] button of Pad ASSY Count. 4. Remove the Sheet guide. Pinch the Pickup tabs on the Sheet guide to pull the Sheet guide to remove it. Sheet guide Pickup tab 5. Rotate the Pick roller bushing (left side) in the direction of the arrow. Pick roller The counter is reset to "0". 6.3. Replacing the Pick Roller Replace the Pick roller following the procedure below. 1. Remove the document on the Paper chute. 2. Open the ADF while pulling the Cover open lever. Paper chute ADF Pick roller bushing Pick roller shaft 6. Remove the Pick roller with its shaft. Slightly pull up the left part of the Pick roller shaft (about 5mm), move it towards the left side, and then raise it to remove from the scanner. Cover open lever Pick roller shaft Pick roller 24