Garmin Edge 1030 Owners Manual - Page 25

1 Select > Activity Profiles. 2 Select a profile. 3 Select Auto Features > Auto Pause. 4 Select an option: • Select When Stopped to pause the timer automatically when you stop moving. • Select Custom Speed to pause the timer automatically when your speed drops below a specified value. 5 If necessary, customize optional time data fields (Adding a Data Screen, page 19). Using Auto Scroll You can use the Auto Scroll feature to automatically cycle through all of the training data screens while the timer is running. 1 Select > Activity Profiles. 2 Select a profile. 3 Select Auto Features > Auto Scroll. 4 Select a display speed. Starting the Timer Automatically This feature automatically detects when your device has acquired satellites and is moving. It starts the activity timer or reminds you to start the activity timer so you can record your ride data. 1 Select > Activity Profiles. 2 Select a profile. 3 Select Timer Start Mode. 4 Select an option: • Select Manual, and select to start the activity timer. • Select Prompted to display a visual reminder when you reach the start notice speed. • Select Auto to start the activity timer automatically when you reach the start speed. Phone Settings Select > Connected Features > Phone. Enable: Enables Bluetooth technology. NOTE: Other Bluetooth settings appear only when Bluetooth wireless technology is enabled. Friendly Name: Allows you to enter a friendly name that identifies your devices with Bluetooth technology. Pair Smartphone: Connects your device with a compatible Bluetooth enabled smartphone. This setting allows you to use Bluetooth connected features, including LiveTrack and activity uploads to Garmin Connect. Smart Notifications: Allows you to enable phone notifications from your compatible smartphone. Missed Notifications: Displays missed phone notifications from your compatible smartphone. Text Reply Signature: Enables signatures in your text message replies. System Settings Select > System. • Display Settings (Display Settings, page 21) • Widget Settings (Customizing the Widget Loop, page 21) • Data Recording Settings (Data Recording Settings, page 21) • Unit Settings (Changing the Units of Measure, page 21) • Tone Settings (Turning the Device Tones On and Off, page 21) • Language Settings (Changing the Device Language, page 21) Display Settings Select > System > Display. Auto Brightness: Automatically adjusts the backlight brightness based on the ambient light. Brightness: Sets the backlight brightness. Backlight Timeout: Sets the length of time before the backlight turns off. Color Mode: Sets the device to display day or night colors. You can select the Auto option to allow the device to set day or night colors automatically based on the time of day. Screen Capture: Allows you to save the image of the device screen. Customizing the Widget Loop You can change the order of widgets in the widget loop, remove widgets, and add new widgets. 1 Select > System > Widget Management. 2 Select a widget to add or remove it from the widget loop. 3 Select to change the location of a widget in the widget loop. Data Recording Settings Select > System > Data Recording. Record To: Sets the data storage location to internal storage or an optional memory card. Recording Interval: Controls how the device records activity data. The Smart option records key points where you change direction, speed, or heart rate. The 1 Sec option records points every second. It creates a very detailed record of your activity and increases the size of the stored activity file. Cadence Averaging: Controls whether the device includes zero values for cadence data that occur when you are not pedaling (Data Averaging for Cadence or Power, page 15). Power Averaging: Controls whether the device includes zero values for power data that occur when you are not pedaling (Data Averaging for Cadence or Power, page 15). Log HRV: Sets the device to record your heart rate variability during an activity. Changing the Units of Measure You can customize units of measure for distance and speed, elevation, temperature, weight, position format, and time format. 1 Select > System > Units. 2 Select a measurement type. 3 Select a unit of measure for the setting. Turning the Device Tones On and Off Select > System > Tones. Changing the Device Language Select > System > Language. Time Zones Each time you turn on the device and acquire satellites or sync with your smartphone, the device automatically detects your time zone and the current time of day. Setting Up Extended Display Mode You can use your Edge 1030 device as an extended display to view data screens from a compatible Garmin multisport watch. For example, you can pair a compatible Forerunner device to display its data screens on your Edge device during a triathlon. 1 From your Edge device, select > Extended Display Mode > Connect Watch. Customizing Your Device 21