Garmin G600 Pilots Guide - Page 121
Ident/Facility/City Selection, Runway Information Selection
View all Garmin G600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Foreword Ident/Facility/City Selection The current destination Identifier, Facility Type with icon, Facility Name, and City (location) are shown in the top window of the Flight Plan mode Waypoint Information page. The default is the Nearest airport if there is no active flight plan. Identifier Facility Name City Access (Public/ Private and Symbol) Sec 1 System Sec 2 PFD Sec 3 MFD Sec 4 Hazard Avoidance Features Sec 5 Additional Sec 6 Annun. & Alerts Figure 3-80 Flight Plan Ident/Facility/City Detail 1) While viewing the Waypoint Information page of the FPL page group, press the INFO soft key to view information about the waypoint. 2) The current destination Ident, Facility, and City is shown, but may be changed to find information about other choices. Press the small MFD knob to activate the cursor. 3) Use the large MFD knob to highlight the field you wish to change and use the small MFD knob to change the value. 4) Press the ENT key to save the selected value or press the small MFD knob to cancel editing. Runway Information Selection Information is provided for each runway showing the following detail: runway number, runway length, surface type, and the frequency for Pilot-Controlled Lighting (PCL). Runway Number Runway Length & Width Pilot-Controlled Lighting Frequency Arrow Indicates More Runways Runway Surface Figure 3-81 Waypoint Runway Information 1) While viewing the Waypoint Information page of the FPL page group, press the INFO soft key to view information about the waypoint and press the small MFD knob to activate the cursor. 2) Use the large MFD knob to highlight the Runway and use the small MFD knob to display the available runways. 3) Press the small MFD knob to cancel editing. 190-00601-02 Rev. B Garmin G600 Pilot's Guide 3-63 Sec 7 Symbols Sec 8 Glossary Appendix A Appendix B Index